• Polska
  • English
  • Germany
  • Russia
  • Belarus
  • Czech Republic
  • Serbia
  • Slovakia
  • Ukraine
  • Hungary
  • France
  • Spain
EN

About us

As we are concerned with quality of our products and their safety, we pay a lot of attention to examining and testing DMX products.

It would not be possible without our laboratory which is one of a few research institutions of this kind, i.e. specialized in examining carpentry joints.

Lab

1

Introduction of the product

The product is subject to series of tests before it is directed to our warehouses and in consequence to stores. We check compliance with common standards such as PN-EN 14545 as well as our internal quality standards. Results of our tests are being confirmed by certification institutions which we co-operate with, such as TZUS in Czech Republic, ITB (Instytut Techniki Budowlanej - Construction Technology Institute) in Poland and Gdańsk University of Technology. As our internal standards more often than not exceed commonly adopted standards, tests carried out in Polish or European institutions are pure formality.

2

Quality control

A good design is a base for a good product. However, one should always ensure if products supplied to customers are safe and adapted to specific tasks. A special unit manages such duties checking every batch of connectors released by the plant. The control process consists of multiple stages which increases defect detection efficiency.

3

Laboratory and documentation

Our products are subject to many quality tests of highest rigour. All tests are performed by specialized control and measurement equipment. We do believe that systematically gained and documented knowledge is a base for quality development. Each product is accompanied by its Technical Specification Sheet, Execution Drawing and Test Report History. In consequence we are able to implement swiftly new products meeting the European Standards requirements as well as optimize solutions already available in the market. We let such ideas as Safety, Progress and Regularity lead us forward.

History

1996

1997

1998

1999

2001

2003

2004

2006

2007

2008

2009

2010

2012

2013

2013

2015

2018

2018

1996

A new DMX® brand bravely sets its foot in new grounds. We "subjugate" steel with universal bender.

1997

We are starting up production of the first DMX® KP1 rainforced square.

1998

The first production line of DMX® connectors is being established.

1999

We won ITB 1st Technical Approval for timber connectors in Poland - and we're proud of it!

2001

We produce 1,000,000 pcs of DMX® connectors a year.

2003

We started fully automated production of DMX® KP!

2004

DMX® brand sets off to conquer the world! Establishing permanent co-operation with partners located in Czech Republic and the Russian Federation.

2006

Start of automatic coding of DMX® connectors.

2007

DMX® joints won 1st European Technical Approval

2008

The numbes speak for themselves: we manufacture more than 20,000,000 pcs of DMX® connectors and joints over a year.

2009

The DOMAX Company relocates its head office - a new, improved production hall in Łężyce near Gdynia is going to start production of joints.

2010

Unorthodox joints? No problem! We provide custom CNC services which enables us to manufacture non-standard connectors.

2012

DMX® joints in Central Europe and Balkan Peninsula.

2013

We produce 50,000,000 DMX® connectors a year.

2013

Innovative SD decorative joint system has been added to DMX® brand product range.

2015

It is already there! A new, bigger production & warehousing Domax hall with modernised forwarding section.

2018

GRUNDLINE - Wprowadzamy nową markę podstaw słupa

2018

Nowe laboratorium firmy Domax! Rozszerzenie wewnętrzengo wyposażenia naszego laboratorium gwarantuje najwyższą jakość produkowanych przez nas łączników.